# What are these icons?

In this grasshopper tutorial, I will talk about one of our subscriber’s question. Emilio asked about the little icons you see when you right click on the component’s input or output. I will explain about them in this video.

In this grasshopper tutorial, I will talk about one of our subscriber’s question. Emilio asked about the little icons you see when you right click on the component’s input or output. I will explain about them in this video.

Posted in Rhino Grasshopper Tutorials.

- 22nd April 2019
### Felix Candela Shell

In this Grasshopper tutorial, we are going to model the AD Classics by Felix Candela (Or the Los Manantiales Restaurant). First, we are going to start with a circle and then we will divide it into Perpendicular frames. We will use these planes and the Bezier Span component to model the shell. You can also [...] - 26th January 2019
### Grasshopper Lunchbox Tutorial

In this Rhino Grasshopper tutorial, I will show you how you can panel a surface with lunchbox. First I will show you how to make different surfaces in Rhino with 5 different techniques and then I will show you how to panel them. These 5 short tutorials will help you learn Lunchbox for grasshopper easier!

- 6th April 2019
### Maelstrom Component

In this Grasshopper Tutorial, We will model an Optical illusion Pattern based on a Jonathan Harris Video. First, we will model the curves by simply making a polar array of lines and then deform them by using the Maelstrom Component in Grasshopper. Then we will use the Bezier Span curve tool to produce a span between the main curves and control the tangents.

- 9th March 2019
### Geometric Pattern #2

In this parametric Pattern tutorial, we will model an advanced pattern in Grasshopper. first, we will model a series of square cells and then by modeling a corner of the pattern’s curve, we will eventually use the polar array to finish the final pattern. By adding a point we will make the pattern react to the point attractor.

- 20th August 2018
### Boiler Suit

In this Rhino tutorial, I will show you how you can easily model the Boiler suit facade in Rhino. First I will explain about the main panels and how we can model them and then I will model the corner panels and entrance.

- 3rd October 2018
### Confluence Park

In this video tutorial, I will model the confluence park in grasshopper. First I will explain the geometrical constraints of the base polygon of the structure and then I will make it parametric. Then we will work till we finish the surface.

- 21st January 2019
### Parametric Facade

In this Rhino Grasshopper tutorial, I will model a series of panels which change their size based on point attractors. First, we will use the lunchbox plugin to make the facade and then we use the attractor technique to scale the panels in one direction and finish the Parametric Facade.

- 29th September 2018
### Rotating Curves

In this grasshopper tutorial, I will show you how you can start with a simple base curve and then scale and rotate it to produce a parametric rotating curve. First, we will scale the base curve from 1 to 0.2 and then we will move it in Z direction with a series and at the end, we will rotate it with a range of numbers.

- 21st October 2018
### Twist

In this Grasshopper Tutorial, I will teach you how to use the twist command in Rhino 6. I will explain how twist works with a simple twisting Box around a parametric Axis

- 20th April 2019
### Celtic Repeating Pattern

In this Grasshopper tutorial, we are going to model a parametric Celtic repeating pattern. First, we are going to explain how we can model the base module and then we are going to make a triangular grid, use list item to choose the right corners, make circles with the same radius and then use the region difference to produce the base module. Then we will use a triangular grid to orient the base module on it and finish the tutorial.

- 16th September 2018
### Spiral Pattern

In this Spiral pattern grasshopper tutorial, I will show you how you can use a set of circles to produce a spiral pattern. First, we will talk about how dividing the circles will produce the base points and then by rotating the circles and connecting the points, we can produce the spirals.

- 6th September 2017
### Rhino Grasshopper Tutorials

What is Grasshopper3d? With our Rhino Grasshopper Tutorials, you can learn Grasshopper faster and easier! Learning to think parametrically is a hard-won skill, we will help you!

- 21st July 2018
### Kangaroo Basics

In this grasshopper tutorial, I will answer one of our YouTube channel users about the kangaroo plugin. First, we will talk about the basics of kangaroo Physics and then we will remodel a parametric tensile surface in kangaroo2.

- 22nd October 2018
### Carnaval Chair

In this Grasshopper tutorial, I will model the Carnaval chair. First I will explain the curves and how we can model them with NURBS curves. Then I will go for the sections to actually model the chair. We will also model the wires at the end.

- 5th September 2018
### Anemone Grasshopper

In this anemone grasshopper tutorial, I will show you how you can use anemone to produce a simple hexagonal fractal in grasshopper. First I will use anemone to deconstruct a hexagon into its segments and then we will use the “point on curve” tool to extract …

- 1st December 2018
### Ekko Installation Structure

In this parametric design video, we will have a review of the EKKO installation structure. First, we will take a look at the project and how it’s made and then we will remodel it in Rhino Grasshopper.

- 8th July 2018
### Facet Dome

In this grasshopper tutorial, I will explain how you can use the Facet Dome tool to produce Voronoi cells on a revolved surface. First we are going to produce the surface and then pull the voronoi cells on the surface and then make the frames.

- 25th May 2019
### Voronoi Pattern Sunflower

In this Grasshopper tutorial, we produce a Voronoi Pattern based on Sunflower seed distribution. The technique we will use is the Maelstrom component to twist a series of straight lines so we’ll not use the actual Fibonacci sequence to produce the Voronoi cells but it’s a quick trick you can use to produce a pattern similar to it.

- 26th November 2018
### Attractor Voronoi Cells

In this Grasshopper Voronoi attractor tutorial, I will show you how you can produce point attractors for Voronoi cells. First, we will make the desired boundaries and then populate points in them to increase the number of Voronoi cells.

- 18th March 2019
### Lotus Temple

In this tutorial, we will model the Lotus Temple in Grasshopper. First, we will study the form and how it can be remodeled with a series of circles. Then we will produce the arcs which make the concrete shells of the temple. We will also model the outer part and finish this tutorial.

- 6th May 2018
### Random

In this video tutorial, I will show how you can use “random” to produce random numbers and use them in your modeling. We will use random numbers for extruding a set of panels in their normal direction and learn how to change the random numbers.

- 11th July 2018
### Graph Mapper

In this grasshopper tutorial, I will explain about the Graph Mapper tool and how you can implement it in your design. First, we will learn how the Range tool can make data for Graph mapper and then we will use the graph mapper to change the distribution.

- 19th January 2019
### Evolution Tower

In this Rhino Grasshopper Tutorial & for the Architecture Design Series we are going to model the Evolution Tower. First, we will define a box in Rhino and then import it in Grasshopper Then we will twist the box by defining the axis line and the degree of rotation.

- 23rd July 2018
### Waffle Structure

In this grasshopper tutorial I will model a waffle structure and use a solid model to define the sections. First of all we will model a solid and then we will use simple techniques to extract the sections and then we will calculate the slit.