Aguaviva is the third piece in David’s Strata range which uses multiple layers to create a sense of movement. This piece is made up of a total of 93 pieces of solid wood which are carefully joined together to produce this dynamic sculptural side table.
Human eyes could be easier to trick than you might think. A Japanese professor, Kokichi Sugihara, created sculptures that trick the mind to see the impossible. He was the winner of the Best Illusion of the Year Contest in 2010 and 2nd place in 2016.
Wooden Pendant Lamp Design & Ideas #3: This is an early version of the Moon Lamp designed by Verner Panton for the Danish lamp manufacturer Louis Poulsen, produced in the 1960s. The lamellae can be placed in any conceivable position. In order to reinforce the impression of the spherical shape, each of the rings is slightly arched. It is in a very good vintage condition.
Bit of a redesign and build of a geodesic climbing frame by Paul Robinson, most half sphere climbing frames are a bit low to the ground so the designer made this one more of a sphere to get a better vertical climbing area on the sides of the dome.
Wooden Wall Clock Designs & Ideas #4: This clock is made of seven layers of precisely cut and engraved wood. The layers of wood resemble the growth rings of a tree. The clock will mount flat to the wall because the mechanism is fit inside the depth of the layers. finishing: The front side of the wood has been sanded. background: Growth rings, also referred to as tree rings or annual rings, can be seen in a horizontal cross section cut through the trunk of a tree. Growth rings are the result of new growth in the vascular cambium, a layer of cells near the bark that is classified as a lateral meristem.
Wooden Wall Clock Designs & Ideas #3: This clock is made of real wood with natural texture and it’s ready to hang, no assembly required. Size (In Inches): 11.5” diameter, Size (In centimeters): 29 cm diameter.
Wooden Coaster Design & Ideas #4: Carl Friedrich Gauss distinguishes between three types of curved surfaces, single curved – neutral (cylindrical), and double curved – negative (hyperboloid) and positive (spherical).
Curved surfaces are very attractive, especially negative double curved surfaces, but also very complicated to perform. What’s interesting about them in constructive terms is the increase in stiffness and load capacity as the surface is bent in one and two directions.
How to make a star pendant lamp from a small piece of 1/4-in-thick plywood. The team from HomeMadeModern used a Full Spectrum Laser cutter to create this star pendant lamp. First, the concentric star pattern was cut by the laser. Then the star shapes were stacked and glued together, offsetting the points of the stars, to create dimension.
Wooden Coasters Design & Ideas #3: This would make a wonderful gift for tea and coffee drinkers. It can be used as a decoration, an art piece or as a coaster. It looks great on your table and protects its surface. Diameter: 3.1inches (8cm), Depth: 0.08inches (0.2cm). In mathematics, a Voronoi diagram is a partitioning of a plane into regions based on distance to points in a specific subset of the plane. That set of points (called seeds, sites, or generators) is specified beforehand, and for each seed there is a corresponding region consisting of all points closer to that seed than to any other.
Wooden Floor Lamp Designs & Ideas #2: Wooden lamp – This wooden floor lamp or table lamp is made from Birch. It is also available in Oak. Lamp height – 170mm, Lamp width – 170mm, Lamp depth – 170mm. The intricately cut table lamp uses a mulberry diffusing material to add organic detail behind the natural grain of the timber. It includes a bright LED bulb and UK plug fitting.”Sculpture for use” – This table lamp creates an interesting focal point in whatever space it is placed in and transforms into a beautiful living room lamp or bedside lamp.
Oleg Tyrnov designed this wooden office chair with the help of parametric modelling techniques considering the principles of ergonomics in order to create a beautiful, unique and innovative product which is really comfortable too.
In this video you can watch the fabrication process of DIY laser cut birch wood candle holder
Shapeways opens up 3D printing to the masses, allowing us to design and share our ideas as well as realize them as physical objects.
Wooden Pendant Lamp Designs & Ideas #1: The inspiration for the Rica wooden lamp shade came from Africa and the neck-rings women wear as part of their culture. It is a modern wooden lamp, but has a traditional feel at the same time. Rica is the perfect hanging lamp for every room, its handmade, natural wood, and uniquely designed and manufactured at studio 9 3/4 in Bulgaria. The lampshade is 100% handmade with love and passion for design! This wooden chandelier is simple and minimalistic and in the same time creates a warm and ambient atmosphere. It suits classic or modern furniture and is designed to bring a cosy feel to bedrooms, offices, living rooms, dining tables, kitchen islands or sideboards.
Wooden Wall Art Designs & Ideas #1: Dimensions: Length: 52″, Height: 24″, Width: 4.25″. The Phoenix Wall Fixture is the end result of pure, mathematical random data when channeled correctly. Born of “Perlin noise”, this piece is a small snippet of an infinitely distorted plane in space-time. In its default form, the wall panel is comprised of 55 vertical pieces of 1/2 inch Baltic Birch plywood attached with screws to three horizontal wooden bars across the back.The Phoenix Wall Fixture can be altered from its natural light-brown color, and can be stained or painted in a variety of different color options.
Wooden Table Lamp Designs & Ideas #3: A limited edition sacred geometry table light and sculpture. Will bring you into the magical world of Alice in Wonderland. It has an 11 inch diameter on a wooden base. Easy to swap out the bulb. Includes: 6 foot black cord with switch, and a warm 7 watt incandescent bulb to cast stunning shadows.
Wooden Pendant Lamp Design & Ideas #2: It`s simple and minimalistic and in the same time creates a warm and ambient atmosphere. It suits classic or modern furniture and is designed to bring a cosy light to bedrooms, offices, living rooms, dining tables, kitchen islands or sideboard. MATERIAL: 4 mm plywood (all scraped with sandpaper and varnished), black metallic canopy, black fabric wire. DIMENSIONS: 60cm (24 in) height – 50cm (20 in). 100% HANDMADE.
Do not Disturb is a clocks collection that intended to be a non-intrusive object for your home. Ernest Perera works in this project as a really designer-maker. He uses his own cnc milling machine and finished with his hands.
Wooden Wall Panel Designs & Ideas #1: Unique laser cut wooden panels for your home; this design was made possible using parametric design algorithms; One side finished in walnut, the other painted black – turn the panels around to double the possibilities; There is an infinite number of variations, we stopped at the best six, you can check the other pictures. Each piece is precision cut by CNC laser, finished in walnut wood stain and finely sanded for a smooth feel. They are made from low density poplar plywood, which makes them light enough to hang even on the tiniest nails. You can also attach double sided tape on the back, for a more permanent finish on your wall.
Wooden Wall Clock Designs & Ideas #1: Modern Voronoi wall clock for your living room, bedroom or the office. Made of wood, square, organic-like, no dials visible, it’s more of a statement than just an object that tells the time. It’s nature confined in a basic shape.
This item begins as an ordinary plywood board. It gets cut to the desired size, finely sanded and then placed under the laser cutter, where our own custom-made-through-sweat-and-tears template is loaded. We take out the resulting pieces from the “oven” so we can finish it with wood stain. We sand it one more time, using fine sandpaper. This is all done manually – so all of those small imperfections hint that even though it’s laser cut, there are human hands that took over.
Researchers from ETH Zurich have built a prototype of an ultra-thin, curved concrete roof using innovative digital design and fabrication methods. The tested novel formwork system will be used in an actual construction project.
Wooden Wall Mirror Designs & Ideas #1: Convex round wall hanging mirror by SurreyWoodsmiths. Introducing the contemporary wooden AURA mirror with convex mirror glass. This beautiful piece is carved from one solid piece of birch and combines the classic look of a convex mirror with a contemporary wooden frame. This is a “large” 740mm diameter and 30mm deep convex AURA mirror. It is also available at 500mm diameter
The ZCB Bamboo Pavilion is a public event space built for the Construction Industry Council’s Zero Carbon Building (ZCB) in the summer of 2015 in Kowloon Bay, Hong Kong.