In this Parametric Design Video, I’m going to explain the Voronoi DIagram based on a project located in Mexico which uses the Voronoi cells in the facade Design. First We will study the facade and how it’s fabricated and then we will remodel something similar in Grasshopper.

More →## Voronoi Diagram

## Earrings Design #2

In this Laser Cut Earring Design tutorial, I will show you how to make a parametric model for nautilus Earrings. First, we will model the base surface with strips and then by using the flow command, we will bend the surface from a baseline into a NURBS curve. This will give us more control over the finished model.

More →## Tornado Tower

This Rhino Grasshopper tutorial is a small example of how you can use grasshopper and the lunchbox plugin to easily model a tower. First, we will model the surface of the tower using three circles then we will use lunchbox to produce the diagrid structure and finally we will model the quad panels and finish the tutorial.

More →## Ekko Installation Structure

In this parametric design video, we will have a review of the EKKO installation structure. First, we will take a look at the project and how it’s made and then we will remodel it in Rhino Grasshopper.

More →## Parametric Pattern #1

In this Laser cut design video, I have made a definition to produce a parametric pattern for laser cutting. First I will explain the inputs and how you can change them to change the base pattern and in the end, you can give thickness to your design.

More →## Attractor Voronoi Cells

In this Grasshopper Voronoi attractor tutorial, I will show you how you can produce point attractors for Voronoi cells. First, we will make the desired boundaries and then populate points in them to increase the number of Voronoi cells.

More →## Mercedes Benz Satdium

In this Parametric Design & Modeling video I’m going to talk about the Mercedes Benz Stadium and how you can model it in Grasshopper. First we will study the mechanism and then we will remodel it in Grasshopper.

More →## Earring Designs #1

In this Laser Cut Earring Design tutorial, I will show you how to make a parametric model for Rhombus Earrings. First, we will model the base polygon and make it parametric by using evaluate curve and then we will define the sections and offset the boundaries to make the final model.

More →## Ladybug Grasshopper

In this Ladybug Grasshopper tutorial, I will show you the basics. First I will show you how to install Ladybug and run the components. Then I will explain the energy plus weather files (EPW) and how they give us the most important information about temperature, humidity and wind.

More →## Arboskin

This is the first video in the “Parametric Modeling & Design” series. In this video, we will have a quick review of the Arboskin Project. First, we will talk about how the project has been made and look at some details. Then we will talk about a simple Grasshopper algorithm and how you can model the pyramid and slice it with a rotating plane.

More →## Diamond Panels

In this Lunchbox grasshopper tutorial, I will show you how you can make complete diamond panels on a closed NURBS surface. First, we will use the lunchbox plugin to produce the panels and then we fix the triangle panels by combining them into diamonds and finally combine them back together.

More →## Paneling Tools – 2d Cellulate

In this Paneling Tools Grasshopper tutorial, I will show you how you can use the grid attractors and the cellulate grid tool to produce a series of deforming circles based on point or curve attractors

More →## Surface box

In this tutorial, I will explain how you can model a series of boxes with different heights based on a point attractor and then morph a module in them. This tutorial will help you cover a surface with a desired 3d module.

More →## Metaball 2D

In this metaball Grasshopper tutorial, I will teach you how you can produce a freeform column model that merge together and form a metaball. First, we will produce the point charges and then based on a profile curve we will produce the metaball curves.

More →## Lincoln Zoo Pavilion

In this Grasshopper tutorial we will model the Lincoln Zoo Pavilion. First I will explain how you can model the curves , mirror it and finally model it as a solid. By technique you can produce a sine curve on a freeform surface.

More →## Fillet Edge

In this Grasshopper Tutorial, I will talk about the Fillet edge command (Rhino 6) which you can find in the Surface, Utility menu. First I will explain how you can make a polysurface and then fillet a face by choosing it with list item and then extract the filleted surfaces.

More →## Substrate

In this Grasshopper Tutorial, I will talk about the substrate command which you can find in the Mesh, Triangulation menu. First I will explain the inputs and then I will combine it with surface split and random extrusion to show you a simple example of how you can use it.

More →## Grasshopper Attractor

This Grasshopper Attractor tutorial is about you how you can use a point attractor to produce a smooth mesh with Weaverbird, First I will divide the surface into segments and then by converting the NURBS surface to mesh and by using Weaverbird I will produce the bumps.

More →## Parametric Table

In this Grasshopper tutorial, I will model a parametric table and show you how you can use a simple trick to get help from Rhino to model the table easier. First I will model a simple solid in Rhino and then I will use Cage edit and Grasshopper to find the best design for the table

More →## Carnaval Chair

In this Grasshopper tutorial, I will model the Carnaval chair. First I will explain the curves and how we can model them with NURBS curves. Then I will go for the sections to actually model the chair. We will also model the wires at the end.

More →## Twist

In this Grasshopper Tutorial, I will teach you how to use the twist command in Rhino 6. I will explain how twist works with a simple twisting Box around a parametric Axis

More →## Bow Building

In this Rhino Grasshopper Tutorial, I will model the Bow Building in Calgary. First I’m going to use the plan picture to draw the curves in Rhino and then I’m going to extrude the facade surfaces and panel them using Lunchbox and Weaverbird

More →## Eve Explode

In this Rhino tutorial, I will explain the Eve Explode Plugin and how you can use it to move objects based on a point in Rhino. This plugin works on Rhino 5 so be sure to download the Plugin and Rhino 5 from the link below

More →## Parametric Building

In this Parametric Building tutorial, I will teach you how to model a parametric facade in Grasshopper. First I will divide the surface into divisions and then convert the facade to mesh and use weaverbird to extrude the Mesh. finally, the point attractors will produce a parametric building.

More →