In this tutorial, we will model the Lotus Temple in Grasshopper. First, we will study the form and how it can be remodeled with a series of circles. Then we will produce the arcs which make the concrete shells of the temple. We will also model the outer part and finish this tutorial.

More →## Lotus Temple

## Truchet Tiles

In this video, we will model the Truchet tiles in Grasshopper. First, we will take a look at the tiles and how Truchet tiles work. Then we will use dispatch to produce two sets of square cells. We will simply draw arcs from the midpoint of the edges to form the pattern.

More →## Geometric Cake

In this tutorial, we will model the Dinara Kasko algorithmic cake in Grasshopper. First, we will start with a series of square cells and then by moving them up, scaling and rotating them, we will form the base curves. Then we will use the grasshopper attractor techniques to connect the scale factor to the attractor and finish the tutorial.

More →## Geometric Pattern #2

In this parametric Pattern tutorial, we will model an advanced pattern in Grasshopper. first, we will model a series of square cells and then by modeling a corner of the pattern’s curve, we will eventually use the polar array to finish the final pattern. By adding a point we will make the pattern react to the point attractor.

More →## Schüco Parametric System

In this Parametric Architecture video we will take a look at the Schüco Parametric System and how it works. Then we will model the panels in Grasshopper by producing a base surface and then dividing the surface in to panels. We will also use a range of numbers combine by Graph mapper to produce a sine wave.

More →## Islamic Geometric Pattern

In this Rhino Grasshopper Tutorial, I will model an Islamic Geometric pattern and make it parametric by defining moving lines and making a polar array from the main Unit. First, we will study the pattern and how we can make it as easy as possible and then we will start modeling it in Grasshopper.

More →## Parametric Reuleaux Triangle

In this Rhino Grasshopper Tutorial, we are going to model a Parametric Reuleaux Triangle and make a pattern by dividing the edges, connecting the points based on relative paths and produce a new pattern by changing the polygon, division number & other parameters which define the geometry.

More →## Canton Tower

In thisRhino Grasshopper Tutorial, we will model something similar to the Canton Tower. First we will define 3 ellipses and then rotate them to make the tower’s sections. After lofting the sections we can use the Lunchbox plugin to make the structure and by using the Dispatch we will extract two different groups of the structure.

More →## ONE Teahouse

In this Rhino Grasshopper tutorial, I will model something similar to the ONE Teahouse / MINAX Architects. First, we will define a box and a sphere. Then we will scale NU the sphere so we can control the shape. If we divide the surface of the scaled Sphere into points, Project these points on to the Box and connect them we will have a series of parametric lines which we can finally turn them into a box.

More →## Pencil Office

In this rhino Grasshopper Tutorial, we will model something similar to the Pencil Office facade. First, we will draw a simple line which will define the height of the facade and then by using evaluate curve and graph mapper divide the line with a non-linear distribution. In the end, we will talk about the “Relative Item” component and how it can help us connect the point together.

More →## Parametric Facade Tutorial

In this Rhino Grasshopper Tutorial, we will model a perforated parametric facade in Grasshopper and with the help of Lunchbox Plugin. First, we will model the surface and then divide them into triangular panels. By using the attractor point technique we will make the panels scale differently across the facade.

More →## Arduino Tutorial For Beginners

In this Rhino Grasshopper Tutorial, I’m going to show you how you can (write/read) data (to/from) Arduino in Grasshopper. First, we will install the Firefly plugin and then we will work with reading and writing function to connect with Arduino.

More →## Grasshopper Lunchbox Tutorial

In this Rhino Grasshopper tutorial, I will show you how you can panel a surface with lunchbox. First I will show you how to make different surfaces in Rhino with 5 different techniques and then I will show you how to panel them. These 5 short tutorials will help you learn Lunchbox for grasshopper easier!

More →## Parametric Facade

In this Rhino Grasshopper tutorial, I will model a series of panels which change their size based on point attractors. First, we will use the lunchbox plugin to make the facade and then we use the attractor technique to scale the panels in one direction and finish the Parametric Facade.

More →## Evolution Tower

In this Rhino Grasshopper Tutorial & for the Architecture Design Series we are going to model the Evolution Tower. First, we will define a box in Rhino and then import it in Grasshopper Then we will twist the box by defining the axis line and the degree of rotation.

More →## Tween Curves (Rhino)

In this Rhino Tutorial, we will use parametric curves in Rhino to model a series of solids. first, we will use some tricks to make the base curves as simple as possible and then we will use tween curves and extrusion to make the solids. In the end, we will make the base surface and review some extra tips you can use to make your model more professional!

More →## Rotating Units

In this Rhino Grasshopper Lesson, I will show you how to rotate a series of surfaces around their edges and then control how many of the starting and ending ones have a zero rotation. First, we will divide a surface into sections and then extract the edge and finally rotate the panels around the edge.

More →## Brick Wall Design

In this Rhino Grasshopper Lesson, I will show you how to produce a parametric brick wall in Rhino. First we will explore the options of Brick Design plugin and how you can use it to produce a parametric wall and then we will use attractors to deform our brick wall with points and curves and images.

More →## Parametric Ring

In this Rhino Grasshopper Tutorial, we will model a Parametric Ring. First, we will model the base curve based on Polar points and then give it a rectangular section and finish the model with a sweep1.

More →## RMIT Design Hub

In this Rhino Grasshopper Tutorial, I will model the rotating circular panels of the RMIT Design Hub Building. First, we will take a look at the building’s facade and how its constructed. Then we will make the circles in Rhino and then export them into Grasshopper and start rotating them based on a point attractor. We will also model the rotating axis of the windows.

More →## Sectioning Surface

In this Rhino Grasshopper Tutorial, I’m going to teach you how to make a series of sections from a surface. First, we will model the surface in Rhino and then we will use contour to make the sections.

More →## Parametric Arcs

In this Rhino Grasshopper Tutorial, I will show you how to make a series of parametric Arcs. So first we are going to talk about the Arc component and the inputs and how we can control them and then we are going to dive into a more advanced modeling technique.

More →## Parametric Lamp #1

This laser cut design video is going to show you how you can make a parametric pendant lamp in Grasshopper and use the algorithm to produce dxf files for laser cutting. You can easily bake the boundaries and save the file as dxf files and fabricate the Lamp.

More →## Delaunay Mesh

In this Rhino Grasshopper Tutorial, we will use the Delaunay Mesh component to model different smooth meshes. First, we will define random points and connect them bt Delaunay mesh and then by using the Weaverbird plugin, we will smooth the final result.

More →