In this Rhino Grasshopper Tutorial, we will model a Parametric Ring. First, we will model the base curve based on Polar points and then give it a rectangular section and finish the model with a sweep1.
If you are new and want to get started with the tutorials you can watch this introduction video to learn about the tips and tricks you can use to make the Grasshopper Canvas easier to work with! you can also download the Bifocals plugin to see the component name on the top and learn easier!
In this video tutorial, I will explain how to use Rotate Axis tool to produce a linear kinetic origami surface. We will simply model a plane surface and use rotate axis to form the origami structure. then we will use a simple method to open and close the origami.
In this Rhino Grasshopper Tutorial, we will use the Delaunay Mesh component to model different smooth meshes. First, we will define random points and connect them bt Delaunay mesh and then by using the Weaverbird plugin, we will smooth the final result.
In this Rhino Grasshopper pufferfish plugin tutorial we will use the twisted box pipe variable component to make a parametric model. First we will define the inputs and how it works and then we will use the thickness component to extract the center.
In this Paneling Tools Grasshopper tutorial, I will show you how you can use the grid attractors and the cellulate grid tool to produce a series of deforming circles based on point or curve attractors
In this grasshopper tutorial, I will answer one of our YouTube channel users about the kangaroo plugin. First, we will talk about the basics of kangaroo Physics and then we will remodel a parametric tensile surface in kangaroo2.
In this grasshopper tutorial, we will make a parametric surface by using the tween curve tool and a repeating pattern. First, we learn how to make a series of curves between two curves and then we move them by a repeating pattern to make a surface.
This Grasshopper Attractor tutorial is about you how you can use a point attractor to produce a smooth mesh with Weaverbird, First I will divide the surface into segments and then by converting the NURBS surface to mesh and by using Weaverbird I will produce the bumps.
In this Parametric Building tutorial, I will teach you how to model a parametric facade in Grasshopper. First I will divide the surface into divisions and then convert the facade to mesh and use weaverbird to extrude the Mesh. finally, the point attractors will produce a parametric building.
In this Rhino Grasshopper stair tutorial we will use a simple loft surface to model a series of parametric stairs. First we will model the base curves in Rhino and use the loft command in Grasshopper to make the surface. Then we will use the “Contour” command to make the stairs curves and use an offset component combined with etrusion to finish the model.
In this grasshopper tutorial, we will model a parametric pattern by using Hexagons to produce stars. First, we will study the pattern and how it can be modeled parametrically and then we will make the hexagon grid, extract the corners and put the polygon on the points to make the pattern. We will also study a way of grouping the cells and extract the boundaries.
In thisRhino Grasshopper Tutorial, we will model something similar to the Canton Tower. First we will define 3 ellipses and then rotate them to make the tower’s sections. After lofting the sections we can use the Lunchbox plugin to make the structure and by using the Dispatch we will extract two different groups of the structure.
In this Grasshopper Voronoi tutorial, we will use curve attractors to control the Voronoi cells. First, we will use a boundary to make the base Voronoi cells and then we will define a curve and populate random points in it. In the end, we will use dispatch to split the cells into two groups.
In this tutorial, we will model the Gyroid Minimal surface in Grasshopper. First, we will study the equation of the Isosurface which will produce the Gyroid and then we will use the Millipede and Weaverbird Plugin to finish the final mesh.
In this grasshopper tutorial, I will explain how you can use the Facet Dome tool to produce Voronoi cells on a revolved surface. First we are going to produce the surface and then pull the voronoi cells on the surface and then make the frames.
In this Grasshopper Tutorial, I will teach you how to use the twist command in Rhino 6. I will explain how twist works with a simple twisting Box around a parametric Axis
In this tutorial, we will model the Lotus Temple in Grasshopper. First, we will study the form and how it can be remodeled with a series of circles. Then we will produce the arcs which make the concrete shells of the temple. We will also model the outer part and finish this tutorial.
In this grasshopper tutorial, I will talk about the Import PDB tool and how you can use it to visualize a protein file. First, we download the PDB file from the www.rcsb.org website. After that, you can import the PDB file in grasshopper and use the atom data to visualize the protein.
In this video, we will model the Truchet tiles in Grasshopper. First, we will take a look at the tiles and how Truchet tiles work. Then we will use dispatch to produce two sets of square cells. We will simply draw arcs from the midpoint of the edges to form the pattern.
In this Video tutorial, I will explain how you can use the Octree component in grasshopper. You can easily make a parametric octree with random points and then use the random reduce component to delete the boxes which are created by octree.
In this Parametric Facade tutorial, I will show you how you can use multiple dispatches to produce a parametric facade. First, we will use a simple curved surface for the facade and then we will use the Lunchbox plugin to panel it with triangles. Then we will work on the vertices of the triangles to finish the modeling.
In this Grasshopper tutorial, I will model a parametric table and show you how you can use a simple trick to get help from Rhino to model the table easier. First I will model a simple solid in Rhino and then I will use Cage edit and Grasshopper to find the best design for the table
In this Laser Cut Earring Design tutorial, I will show you how to make a parametric model for nautilus Earrings. First, we will model the base surface with strips and then by using the flow command, we will bend the surface from a baseline into a NURBS curve. This will give us more control over the finished model.
In this Video Tutorial, I will explain how to use dispatch with a simple example. First we will dive into the concept of dispatching geometry with true and false and then we will use a Gene Pool to make an advanced dispatch for the facade panels.