How to make a star pendant lamp from a small piece of 1/4-in-thick plywood. The team from HomeMadeModern used a Full Spectrum Laser cutter to create this star pendant lamp. First, the concentric star pattern was cut by the laser. Then the star shapes were stacked and glued together, offsetting the points of the stars, to create dimension.
Here is a video about Cutting and assembly of a laser cut wooden lampshade.
Wooden Wall Clock Designs & Ideas #3: This clock is made of real wood with natural texture and it’s ready to hang, no assembly required. Size (In Inches): 11.5” diameter, Size (In centimeters): 29 cm diameter.
This parametric design made from Baltic Birch Plywood. the bumps form a helix pattern around the lampshade.
Reebok is using 3D technology to break the mold. Bloomberg’s Anne Mostue visited the Boston-based company’s headquarters to see how it’s using proprietary liquid material, software and robotics to draw shoes in three-dimensional layers
Bit of a redesign and build of a geodesic climbing frame by Paul Robinson, most half sphere climbing frames are a bit low to the ground so the designer made this one more of a sphere to get a better vertical climbing area on the sides of the dome.
This lampshade with a notched “waffle” structural system brings the distinctive quality of light in your space. The parametric processes being used to design a unique object with interlocking 40 laser cut ribs.
Human eyes could be easier to trick than you might think. A Japanese professor, Kokichi Sugihara, created sculptures that trick the mind to see the impossible. He was the winner of the Best Illusion of the Year Contest in 2010 and 2nd place in 2016.
Wooden Kitchen Accessories Designs & Ideas #1: Thomas Pavitte: “I’ve always wanted to get something laser cut. This is a bowl that I created out of laser cut plywood.”
This video will show you the most amazing parametric chairs and genius wooden furniture.
Researchers from ETH Zurich have built a prototype of an ultra-thin, curved concrete roof using innovative digital design and fabrication methods. The tested novel formwork system will be used in an actual construction project.
Wooden Earrings Designs & Ideas #2: You don’t have to be a geek to appreciate these bamboo earrings, inspired by 3D modeling programs.14k gold-filled hardware. Measures 3.125″ x 1.125″ including hook. Ultra light-weight and eco-friendly. Designed + Made + Packaged in Southern California.
Wooden Coasters Designs & Ideas #2: Unique wood coaster set! In each set are 4 coasters. Great as home decor or gift to friends and family. Each coaster is 3.9 Inches / 10 cm diameter. Each of our coaster is unique with natural wood texture. Made of FSC certified birch wood.
This bridge was produced using 3D concrete printing technology by Ghent University in collaboration with Vertico. The design and production of a topology-optimized prestressed concrete bridge is presented. Topology optimization (TO) is a mathematical method that optimizes material layout within a given design space
Wooden Wall Clock Designs & Ideas #4: This clock is made of seven layers of precisely cut and engraved wood. The layers of wood resemble the growth rings of a tree. The clock will mount flat to the wall because the mechanism is fit inside the depth of the layers. finishing: The front side of the wood has been sanded. background: Growth rings, also referred to as tree rings or annual rings, can be seen in a horizontal cross section cut through the trunk of a tree. Growth rings are the result of new growth in the vascular cambium, a layer of cells near the bark that is classified as a lateral meristem.
Wooden Coasters Design & Ideas #3: This would make a wonderful gift for tea and coffee drinkers. It can be used as a decoration, an art piece or as a coaster. It looks great on your table and protects its surface. Diameter: 3.1inches (8cm), Depth: 0.08inches (0.2cm). In mathematics, a Voronoi diagram is a partitioning of a plane into regions based on distance to points in a specific subset of the plane. That set of points (called seeds, sites, or generators) is specified beforehand, and for each seed there is a corresponding region consisting of all points closer to that seed than to any other.
Wooden Decorative Panel Designs & Ideas #2: Decorative Wooden Panel, Laser Cut Wood, Moroccan Style. Measurements: Diameter: 12.9 cm or 9.8 cm
M Arch 1 Studio, Force Matter II: Calibration, School of Architecture, CUHK, Semester 2, 2017-18
A continuous line of plastic makes up this intricate robot-built chair, designed using a new 3D-printing software by a team from the Bartlett School of Architecture in London. The Bartlett’s Design Computation Lab (DCL), a part of University College London, created the software to open up new possibilities for 3D printing.
Do not Disturb is a clocks collection that intended to be a non-intrusive object for your home. Ernest Perera works in this project as a really designer-maker. He uses his own cnc milling machine and finished with his hands.
German engineer Stefan Lehnert has pioneered the use of ethylene tetrafluoroethylene ─ a highly durable, light and adaptable plastic ─ in architecture. The roof and cladding system he invented, based on plastic cushions filled with air, is energy efficient and able to withstand high impact.
In this video you can watch the fabrication process of DIY laser cut birch wood candle holder