In this Grasshopper tutorial, we will model the Lincoln Zoo Pavilion. First I will explain how you can model the curves, mirror it and finally model it as a solid. By technique, you can produce a sine curve on a freeform surface.
In this Video tutorial, I will show how you can use ?Brep/Plane? intersection tool to produce a simple but complicated pattern on a surface. first we will define parametric curves on the surface and then we will use Per frames to intersect with the surface.
In this video tutorial I will explain how you can use Pipe variable and isotrim to produce a parametric surface. First we will use the pipe variable tool to produce a pipe which its radius changes at different locations and then we?
In this Rhino Tutorial, we will use parametric curves in Rhino to model a series of solids. first, we will use some tricks to make the base curves as simple as possible and then we will use tween curves and extrusion to make the solids. In the end, we will make the base surface and review some extra tips you can use to make your model more professional!
In this video tutorial, I will explain how to use Rotate Axis tool to produce a linear kinetic origami surface. We will simply model a plane surface and use rotate axis to form the origami structure. then we will use a simple method to open and close the origami.
Orient Direction is a tool which can perform 3 different transformations on geometry. You can Move, Rotate and Scale. In this example, I will show how you can do this by a point and a set of rectangles and use point attractor to change?
In this Spiral pattern grasshopper tutorial, I will show you how you can use a set of circles to produce a spiral pattern. First, we will talk about how dividing the circles will produce the base points and then by rotating the circles and connecting the points, we can produce the spirals.
In this Rhino Grasshopper tutorial, we will use Mesh+ and Weaverbird to model a weaving pattern on a Nurbs surface. First, we will model a Surface in Rhino using Sweep1 and then we will use Mesh+ to model the pattern. Finally, we will use weaverbird to smooth the results and make the weaving pattern.
In this Ladybug Grasshopper tutorial, I will show you the basics. First I will show you how to install Ladybug and run the components. Then I will explain the energy plus weather files (EPW) and how they give us the most important information about temperature, humidity and wind.
In this Rhino Grasshopper Tutorial, I will model the rotating circular panels of the RMIT Design Hub Building. First, we will take a look at the building?s facade and how its constructed. Then we will make the circles in Rhino and then export them into Grasshopper and start rotating them based on a point attractor. We will also model the rotating axis of the windows.
In this Rhino Grasshopper Tutorial, we will model a Parametric Ring. First, we will model the base curve based on Polar points and then give it a rectangular section and finish the model with a sweep1.
In this rhino paneling tools tutorial, I will show you how you can use the paneling tools plugin to produce different panels on to a freeform surface. First I will talk about the Grids and how they work in paneling tools and then we will study different paneling techniques.
In this grasshopper tutorial I will talk about the populate geometry tool and how you can use it to produce a set of voronoi cells on a freeform surface. First we will make a rectangular boundary based on our freeform surface and then we will make the voronoi cells.
In this video tutorial you will learn how to use the polar array tool in grasshopper to produce a simple 2d pattern. The polar array will manipulate a simple curve in a circular pattern and finally we will combine the curves in to one single pattern.
In this Parametric Design & Modeling video I?m going to talk about the Mercedes Benz Stadium and how you can model it in Grasshopper. First we will study the mechanism and then we will remodel it in Grasshopper.
In this Rhino Grasshopper Tutorial, I will model the Bow Building in Calgary. First I?m going to use the plan picture to draw the curves in Rhino and then I?m going to extrude the facade surfaces and panel them using Lunchbox and Weaverbird
In this video tutorial, I will talk about how you can use sweep1 to produce a parametric surface. first we will define a curve for the rail parameter and then we will orient a section in to the curve and finally sweep the section with the rail to produce the result.
In this Rhino Grasshopper Tutorial & for the Architecture Design Series we are going to model the Evolution Tower. First, we will define a box in Rhino and then import it in Grasshopper Then we will twist the box by defining the axis line and the degree of rotation.
In this Rhino Grasshopper Lesson, I will show you how to produce a parametric brick wall in Rhino. First we will explore the options of Brick Design plugin and how you can use it to produce a parametric wall and then we will use attractors to deform our brick wall with points and curves and images.
In this anemone grasshopper tutorial, I will show you how you can use anemone to produce a simple hexagonal fractal in grasshopper. First I will use anemone to deconstruct a hexagon into its segments and then we will use the ?point on curve? tool to extract ?
In this Rhino Grasshopper Tutorial, I?m going to teach you how to make a series of sections from a surface. First, we will model the surface in Rhino and then we will use contour to make the sections.
In this parametric Pattern tutorial, we will model an advanced pattern in Grasshopper. first, we will model a series of square cells and then by modeling a corner of the pattern?s curve, we will eventually use the polar array to finish the final pattern. By adding a point we will make the pattern react to the point attractor.
In this Grasshopper tutorial, I will model the Carnaval chair. First I will explain the curves and how we can model them with NURBS curves. Then I will go for the sections to actually model the chair. We will also model the wires at the end.